0
£0.00
|
Support rollers set made from black POM (Polyoxymethylen) for the Tamiya KV-1 (56028) and KV-2 (56030).
The original Tamiya kit parts are made from green ABS plastic and separated in two parts. The rubber tyred area of the support rollers is just implied. When you just paint it black you can see the green of the plastic again after a few hours of driving your tank. Also the implied area is a bit too slim in comparsion to the original one. The metal bearings are also rather loose in the original kit part.
The POM support rollers are made from one piece, the running surface is made slightly expanded so that the track guidance is much better. The running surface of the tyres remains back after running the tank. The Tamiya bearings ME1 are also used with the POM support roller and are no longer loose. The axle cap (Part No. A10) is also used with this part.
For painting the inner surface of the support roller a small stencil is included.
Content:
6x support rollers (POM)
1x stencil (photo-etched part)
1x instructions
